blasting coal miner Interview Questions and Answers

1. What is your experience with blasting in coal mines?

   • Answer: I have [Number] years of experience in blasting operations within coal mines, including [Specific tasks, e.g., drill and blast, stemming, charge calculation, post-blast inspection]. I am proficient in [Specific techniques and equipment, e.g., various explosives, electronic detonators, stemming techniques]. My experience encompasses working in [Types of coal mines, e.g., underground, surface, longwall].

2. Describe your understanding of different types of explosives used in coal mining.

   • Answer: I am familiar with various explosives used in coal mining, including ANFO (ammonium nitrate fuel oil), emulsions, and water gels. I understand their respective properties, such as sensitivity, detonation velocity, and water resistance. I know the importance of choosing the right explosive for different geological conditions and mining methods.

3. Explain the process of calculating the required explosive charge for a blast.

   • Answer: Calculating the charge involves considering factors like rock strength, hole diameter, spacing, burden, and stemming. I utilize [Specific methods, e.g., burden-to-powder factor, empirical formulas] to determine the appropriate amount of explosive for optimal fragmentation and safety. I always cross-check my calculations and consult with experienced personnel when necessary.

4. How do you ensure the safety of personnel during blasting operations?

   • Answer: Safety is my paramount concern. Before any blast, I ensure proper warnings are issued, evacuation zones are established and secured, and all personnel are clear of the blast area. I rigorously check the blasting circuit and detonators to prevent misfires. After the blast, I conduct thorough post-blast inspections to identify any hazards.

5. What are the different types of stemming used in coal mining blasting?

   • Answer: Stemming materials include sand, clay, and specialized stemming plugs. The choice depends on the explosive used and the specific geological conditions. Proper stemming is crucial to confine the explosive energy and prevent flyrock.

6. Describe your experience with electronic detonators.

   • Answer: I have extensive experience using electronic detonators, including [Specific types, e.g., nonel, millisecond detonators]. I understand their advantages in terms of precise timing and improved fragmentation. I am proficient in using blasting machines and software for programming delays and monitoring the blasting sequence.

7. What are the potential hazards associated with coal mine blasting?

   • Answer: Hazards include flyrock, ground vibration, air overpressure, gases released during blasting (e.g., methane, carbon monoxide), and potential for misfires or premature detonations. Understanding these hazards is crucial for implementing appropriate safety measures.

8. How do you handle a misfire situation?

   • Answer: In the event of a misfire, I immediately report the incident to my supervisor. We follow established procedures, which may involve waiting a prescribed period, and then carefully investigate the cause before attempting to dispose of the unexploded charge safely using established procedures.

9. What is your experience with pre-blast surveys and vibration monitoring?

   • Answer: I am familiar with conducting pre-blast surveys to assess the surrounding environment and identify potential hazards. I understand the importance of vibration monitoring to ensure compliance with regulatory limits and minimize damage to structures.

Thank you for reading our blog post on 'blasting coal miner Interview Questions and Answers'.We hope you found it informative and useful.Stay tuned for more insightful content!